News information

current position：Home > Product

03om401 beamsplitter mirror mount

  • Mirror and Beamsplitter Mounts - Product - Unice E-O

    Product Name : Mirror and Beamsplitter Mounts. Description : Three models are available to hold optics of 50.8mm, 101.6mm and 152.4mm (2', 4', and 6') diameter separately. Round mirrors or beamsplitters are held firmly in place by a retaining ring for robust positioning. There are fine/coarse adjustment by thumbscrew and micrometer while ...

    Get Price

  • Cube Beamsplitter Holder - Newport

    Cube beamsplitter holders allow cube beamsplitters to be mounted to a standard mirror mount. They have a clear aperture to allow a transmissive beam to pass through the mount. Mounts a cube beamsplitter to a mirror mount. Compatible with 0.5 or 1.0 inch cube beamsplitters. Requires a 0.5 or 1.0 inch mirror mount. See All Features.

    Get Price

  • Beamsplitter Mirror - Optical Mirror

    Beamsplitter mirrors, also known as transparent mirrors or 'beam splitter' mirrors, have an optical grade dielectric coating on the face of the mirror which reflects between 30-50% of light. The coating is applied to low-iron glass to minimize tint, and the anti-reflective …

    Get Price

  • 25mm Cube Beamsplitter Adapter - Edmund Optics

    25mm Diameter 45°Mirror Beamsplitter Mount (#58-878) This mount can install a 25.4mm or 25mm circular mirror or beamsplitter into a 25/25.4mm TECHSPEC® Kinematic Mount (#58-851 or #58-854) at a 45° angle. The mount design retains the open aperture through the kinematic mounts, increasing versatility in beam splitting applications.

    Get Price

  • Optical Positioners (840)

    The Mirror/Optics Mount provides smooth and precise adjustments with sensitivity of 10 arcsec and can be used in horizontal position as a tilt stage with the Spring Clamp 840-0112 and the Mounting post. from 47 $. delivery. Estimated delivery time: 5 - 6 days. Lock Screws Mirror Mounts 840-0080.

    Get Price

  • Cube Beamsplitter Holders - Newport

    Cube Beamsplitter Holders. These cube beam splitter adaptors can be used as stand-alone fixed mounts, but are designed to work with LP-Series Lens Mounts. Their modular design allows optics that are commonly used with beamsplitters, such as wave plates, polarizers, filters, lenses, and mirrors to be quickly attached to create variable ...

    Get Price

  • Right-Angle Beamsplitter Mounts for 30 mm Cage ... -

    2020-1-8u2002·u2002Features. These Right-Angle Beamsplitter Cage Mounts secure a Ø1' optic within a 30 mm cage system at a 45° angle to the optical axis. Both mounts have two through holes at 90° for perpendicular transmitted beams. The C45P mount incorporates a flexure mechanism that provides ±1° of kinematic pitch and yaw adjustment.

    Get Price

  • Adapter for Beamsplitter at 45 deg - EKSMA Optics

    Adapter for Beamsplitter at 45 deg 840-0116. This Adapter is suitable for dichroic mirrors and beamsplitters operating at AOI 45 deg. It easily accommodates any optical mount designed for 1'' optics or can be attached to any mount using baseplate. mount 840-0020 and adapter for Standard rod 820-0010-02. Optics is firmly held by a plastic ...

    Get Price

  • Sensitivity Evaluation of Mounting ... - University of Arizona

    2016-10-18u2002·u20022. MAM OPTICAL MOUNT The original intent for the investigation into an athermal optical mount was to improve the thermal stability of the mirror and beamsplitter mount assemblies that were used on SIM s Micro-Arc second Metrology Testbed (MAM). The MAM design uses three, 0.015 in. thick, radial leaf springs (fixed at two ends to an

    Get Price

  • 25mm Diameter 45° Mirror Beamsplitter Mount

    25mm Diameter 45°Mirror Beamsplitter Mount (#58-878) This mount can install a 25.4mm or 25mm circular mirror or beamsplitter into a 25/25.4mm TECHSPEC® Kinematic Mount ( #58-851 or #58-854) at a 45° angle. The mount design retains the open aperture through the kinematic mounts, increasing versatility in beam splitting applications.

    Get Price

  • 25mm Cube Beamsplitter Adapter

    25mm Diameter 45°Mirror Beamsplitter Mount (#58-878) This mount can install a 25.4mm or 25mm circular mirror or beamsplitter into a 25/25.4mm TECHSPEC® Kinematic Mount (#58-851 or #58-854) at a 45° angle. The mount design retains the open aperture through the kinematic mounts, increasing versatility in beam splitting applications.

    Get Price

  • Optical Positioners (840)

    The Mirror/Optics Mount provides smooth and precise adjustments with sensitivity of 10 arcsec and can be used in horizontal position as a tilt stage with the Spring Clamp 840-0112 and the Mounting post. from 47 $. delivery. Estimated delivery time: 5 - 6 days. Lock Screws Mirror Mounts 840-0080.

    Get Price

  • 45° Elliptical Mirror Mounts

    2021-2-25u2002·u2002The H45E1 Elliptical Mirror Mount is designed to hold 1' elliptical optics with a minimum thickness of 0.22' (5.5 mm), such as mirrors or beamsplitters. When used in beamsplitter or beam monitoring applications, the through hole on the back side has a diameter of Ø0.66' (Ø16.7 mm) while that on the bottom has a clear aperture of Ø0.40' (Ø10 ...

    Get Price

  • Right-Angle Beamsplitter Mounts for 30 mm Cage Systems

    2020-1-8u2002·u2002The rotation mount can be used to mount wedged compensation plates to correct for angular deviation in the beam introduced by wedged optics upstream. The C45M1 can also rotate polarizing plate beamsplitters to align the reflected and transmitted polarization states relative to the cage system.

    Get Price

  • C-Mounted Standard Cube Beamsplitter

    The C-Mounted Standard Cube Beamsplitter features a coating designed for visible wavelengths and MgF 2 anti-reflection coated faces. The C-Mounted Visible Non-Polarizing Cube Beamsplitter is designed for the 430 - 670nm wavelength range, and the C-Mounted NIR Non-Polarizing Cube Beamsplitter is designed for the 720 - 1080nm wavelength range.

    Get Price

  • Fixed Pellicle Mounts - Thorlabs

    These fixed pellicle beamsplitter mounts are a compact and unobstrusive solution when kinematic tip and tilt of the pellicle are not required (see our Kinematic Pellicle Mounts). The post mountable design features an 8-32 (M4) counterbore directly under the optical surface of the pellicle in order t

    Get Price

  • Optical Positioners - Catalog - Opto-Mechanical Products ...

    5F23 - Miniature Flipping Mirror/Beamsplitter Mount For 12.7 mm (0.5 inch) and 25.4 (1 inch) diameter optics Flip optics in and out of the optical scheme 2/3 axis tilt/translation mounts

    Get Price

  • What are Beamsplitters? Step by Step ... - Two Way Mirror

    The beam splitter mirrors we have on our website have a dielectric coating on the face of the glass that reflects 40% of the light. The coating is applied to a low iron glass to minimize the tint, and has an anti-reflective coating on the back to eliminate a double reflection.

    Get Price

  • Sensitivity Evaluation of Mounting Optics Using

    2016-10-18u2002·u20022. MAM OPTICAL MOUNT The original intent for the investigation into an athermal optical mount was to improve the thermal stability of the mirror and beamsplitter mount assemblies that were used on SIM s Micro-Arc second Metrology Testbed (MAM). The MAM design uses three, 0.015 in. thick, radial leaf springs (fixed at two ends to an

    Get Price

  • 25mm Diameter 45° Mirror Beamsplitter Mount

    25mm Diameter 45°Mirror Beamsplitter Mount (#58-878) This mount can install a 25.4mm or 25mm circular mirror or beamsplitter into a 25/25.4mm TECHSPEC® Kinematic Mount ( #58-851 or #58-854) at a 45° angle. The mount design retains the open aperture through the kinematic mounts, increasing versatility in beam splitting applications.

    Get Price

  • 45° Elliptical Mirror Mounts

    2021-2-25u2002·u2002The H45E1 Elliptical Mirror Mount is designed to hold 1' elliptical optics with a minimum thickness of 0.22' (5.5 mm), such as mirrors or beamsplitters. When used in beamsplitter or beam monitoring applications, the through hole on the back side has a diameter of Ø0.66' (Ø16.7 mm) while that on the bottom has a clear aperture of Ø0.40' (Ø10 ...

    Get Price

  • Kinematic Mirror Mount - Optical Positioners - Catalog ...

    Kinematic Mirror/Beamsplitter Mounts 5MBM24 are used for precise angular and linear alignment of optical elements. There are two models: one with round ( 5MBM24-1, 5MBM24-2, 5MBM24-3) and one with square ( 5MBM24-1SQ, 5MBM24-2SQ, 5MBM24-3SQ) shaped mounting opening. 5MBM24 has a resting flange to stop the optics.

    Get Price

  • Optical Positioners - Catalog - Opto-Mechanical Products ...

    5F23 - Miniature Flipping Mirror/Beamsplitter Mount For 12.7 mm (0.5 inch) and 25.4 (1 inch) diameter optics Flip optics in and out of the optical scheme 2/3 axis tilt/translation mounts

    Get Price

  • Polarizing Beamsplitters, Laser Beam Splitter Optics - ARO

    Our range includes plate beam splitters, cube beam splitters, laser splitter lens, and more. Each type of beam splitters has a unique role in each system. We can help you choose polarizing beam splitters you need. Typically we offer: Size: 3 mm to 400 mm. Surface …

    Get Price

  • Sensitivity Evaluation of Mounting Optics Using

    2016-10-18u2002·u20022. MAM OPTICAL MOUNT The original intent for the investigation into an athermal optical mount was to improve the thermal stability of the mirror and beamsplitter mount assemblies that were used on SIM s Micro-Arc second Metrology Testbed (MAM). The MAM design uses three, 0.015 in. thick, radial leaf springs (fixed at two ends to an

    Get Price

  • Beamsplitter – Photonchina -Manufacture&Fabrication

    2018-2-9u2002·u2002PENTA BEAMSPLITTER CUBE. Broadband Wavelength. 630-680nm. T/R: 20%/80% ±5%Single Wavelength. The penta beamsplitter is composed of a penta prism and a wedge. Like the beamsplitter cube, it has the following properties: -The transmitted beam is neither display nor deflected. - Stable and compact. -Easy operation.

    Get Price

  • 50/50 Beamsplitter

    50. 60. 70. 80. 90. 100. All transmission and blocking (OD) data are actual, measured spectra of representative production lots. Spectra varies slightly from lot to lot. Optical density values in excess of 6 may appear noisy because such evaluations push the resolution limit of low light level measurements.

    Get Price

  • Multi-Band Dichroic Mirrors/Beamsplitters

    Thorlabs' Dichroic Mirrors/Beamsplitters spectrally separate light by transmitting and reflecting light as a function of wavelength. Multi-band dichroic mirrors have three or more bands in which light is transmitted or reflected. Both filters on this page have two transmission bands and at leas

    Get Price

  • Tip-Tilt Polarizer Rotation Mount - Newport

    Overview Tip/Tilt optic rotation mounts provide precise control of polarizers on all three axes of rotation. 1 in. and 0.5 in. wave plates, polarizers, and beamsplitter cubes rotate over 360° smoothly with exacting tip/tilt control while this mount also offers an easier to read rotation scale and independent lock of just the rotation adjustment.

    Get Price

  • 45-Degree Mirror and Beam-splitter Mount for 1 inch

    45-Degree Mirror and Beam-splitter Mount for 1 inch Optics. This is a 45 degree mirror (or beam-splitter) mount for 1 inch diameter optics. The recess is 0.120 inches deep. The component is secured by a nylon-tipped set screw. The base of the mount has a circular boss 0.984 inches in diameter with a 0.508 inch diameter through-bore.

    Get Price

  • China Lsbf-1yt Beamsplitter Optical Two Axis Mirror Mount ...

    China Lsbf-1yt Beamsplitter Optical Two Axis Mirror Mount, Find details about China Mirror Mount, Two Axis Mirror Mount from Lsbf-1yt Beamsplitter Optical Two Axis Mirror Mount - Jiangxi Liansheng Technology Co., Ltd.

    Get Price

  • 45° Elliptical Mirror Mounts

    2021-2-25u2002·u2002The H45E1 Elliptical Mirror Mount is designed to hold 1' elliptical optics with a minimum thickness of 0.22' (5.5 mm), such as mirrors or beamsplitters. When used in beamsplitter or beam monitoring applications, the through hole on the back side has a diameter of Ø0.66' (Ø16.7 mm) while that on the bottom has a clear aperture of Ø0.40' (Ø10 ...

    Get Price

  • OptoSigma Catalog: Gimballed Mirror and Beamsplitter

    2015-3-17u2002·u2002Once roughly set, the mount may be locked and fine motion is then controlled by the micrometer adjusters. These provide rotation for both azimuth and elevation. They are normally mounted in line with the mirror but for situations where the adjusters need to be kept out of the optical path, vertical mounted versions are offered.For beamsplitters ...

    Get Price

  • High-Stability Mirror Mounts - OptoSigma

    OptoSigma's High-Stability Mirror Mount is a hollow-frame designed all-stainless steel holder with high stiffness for standard 25.4 mm mirrors. It is the industry's most compact and affordable stainless steel mount.

    Get Price

  • Teleprompter Mirror

    Optical Quality Teleprompter Mirrors, also known as 'Dielectric Beamsplitter Mirrors', allow a camera to record through with flawless picture quality – while providing a crisp reflection of your text.The reflective side has a tint-free mirror coating, and the backside has an anti-reflective coating, to prevent a …

    Get Price

  • IXF bs Series, Two-Axis, Beam-splitter Flexure Mounts

    The IXFbs series is derived from our popular IXF monolithic flexure mounts. This variation incorporates the same features as our IXF's but has clear apertures cut out to maximize beam clearance for beamsplitter applications. These cutouts are set at 45° and are sized to accommodate the maximum beam size possible at the mount's maximum travel.

    Get Price

  • Lego Optics Lab: Beam Splitter

    2015-7-2u2002·u2002Now that I've got some lenses, mirrors, and prisms from the computer projector, I decided to build and test a beam splitter as the first bit for my Lego optics lab. I originally published 'Lego Optics Lab: Beam Splitter' in my column Square Root of Not at Science 2.0 and it got a link on io9 (my name is misspelled) and on Scientific American.

    Get Price

  • Sensitivity Evaluation of Mounting Optics Using

    2016-10-18u2002·u20022. MAM OPTICAL MOUNT The original intent for the investigation into an athermal optical mount was to improve the thermal stability of the mirror and beamsplitter mount assemblies that were used on SIM s Micro-Arc second Metrology Testbed (MAM). The MAM design uses three, 0.015 in. thick, radial leaf springs (fixed at two ends to an

    Get Price

  • Multi-Band Dichroic Mirrors/Beamsplitters

    Thorlabs' Dichroic Mirrors/Beamsplitters spectrally separate light by transmitting and reflecting light as a function of wavelength. Multi-band dichroic mirrors have three or more bands in which light is transmitted or reflected. Both filters on this page have two transmission bands and at leas

    Get Price

  • OptoSigma - Beamsplitters

    A beam splitter or beamsplitter is an optical component that is used for splitting an incident light beam in two directions. Beamsplitters are used to separate the light by a ratio of power between transmitted and reflected beams but can also be used to separate polarization states or different wavelenths of light. There are two main types of beamsplitters, plate beamsplitter and cube ...

    Get Price

  • Beamsplitter/Polorizer Mounts - SK-Advanced

    Welcome to SK Advanced the home of all your electro optics, confocal microscopy, optomechanics, electroptics,confocal microscopy, opto mechanics, laser optic, translation stage, ספקטרומטר, emccd, laser diode driver, laser driver,micro optics,spectrometer,laser diode, optical filters, optics, notch filter, contact us at: +972-3-549-3364

    Get Price

  • Beamsplitter – Photonchina -Manufacture&Fabrication

    2018-2-9u2002·u2002PENTA BEAMSPLITTER CUBE. Broadband Wavelength. 630-680nm. T/R: 20%/80% ±5%Single Wavelength. The penta beamsplitter is composed of a penta prism and a wedge. Like the beamsplitter cube, it has the following properties: -The transmitted beam is neither display nor deflected. - Stable and compact. -Easy operation.

    Get Price

  • IXF tbs Series, Two-Axis, Beam-Splitter Flexure Mount

    mirror mount, flexure, beamsplitter, top adjust. Skip to the end of the images gallery. Skip to the beginning of the images gallery. Details . The IXF.tbs series is derived from our popular IXF monolithic flexure mounts. Clear aperture cut-outs have been added to maximize beam clearance for beamsplitter applications.

    Get Price

  • Thorlabs BS014 Non Polarizing Beamsplitter Cube on 3 Axis ...

    Thorlabs BS014 Non Polarizing Beamsplitter Cube on 3 Axis Mount * Beamsplitter Cube, 700-1100 nm, 1″ glued to Newport Mount. ***MPN BS014 ***OEM Thorlabs ***SKU*** 15800. SKU: 15800 Category: Prisms and Beam Splitters

    Get Price

  • Lens Tube Adapters - Newport

    These thread adapters allow a CH-1 Beamsplitter Holder to be attached to a 1.0 or 2.0 in. LT Series lens tube. C-Mount Adapters Our C-Mount Adapters are used to connect 1.0 in. LT Series lens tubes with camera lenses, beam expanders, or focal-plane array camera modules.

    Get Price

  • 05BC17MB.1 Beamsplitter Cube - Newport

    The 05BC17MB.1 Broadband Non-polarizing Hybrid Cube Beamsplitter has moderate absorption but minimal polarization sensitivity. The broad spectral flatness of this beamsplitter makes it ideal for use with multiple lasers or tunable lasers. Incoming beams are both transmitted and reflected 45%, with the s and p-polarized components matched to ...

    Get Price

  • 10FC16PB.5 Cube Beamsplitter - Newport

    The 10FC16PB.5 Broadband Polarizing Cube Beamsplitter provides efficient polarization for use with multiple or tunable sources. The 25.4 mm cube polarizer consists of a pair of precision right-angle prisms carefully cemented together to minimize wavefront distortion. The hypotenuse of one of the prisms is coated with a multilayer dielectric ...

    Get Price

  • Cubes, Sliders and Rings - Cubes, Sliders and Rings ...

    Nikon P-EFLC filter cube for SMZ800n & SMZ1270 Stereo Microscope with 18mm filters. Exciter (x) = 18mm, Emitter (m) = 18mm (2/set), Beamsplitter = 18x26x1mm. Filter cube for the smaller stereo microscope models introduced in 2014. **Recommend installation at Chroma to ensure proper gluing. Price: $326.00.

    Get Price

  • K-SERIES LONG-DISTANCE MICROSCOPES: MODEL K2

    2021-4-10u2002·u2002(1x factor), consisting of K2 DistaMax Focuser, Mirror Diverter, dual . set of standard tubes and Delrin Spacer for ¼-in. – 20 mounting screw. 995498 Infinity Model K2 DistaMax ROBUSTO™ Type Dual-Port Main Body 8,065.00 (1x factor), consisting of K2 DistaMax Focuser, 50/50 Beamsplitter Cube, and dual set of standard tubes.

    Get Price

  • Kinematic Mirror Mount - Optical Positioners - Catalog ...

    Kinematic Mirror/Beamsplitter Mounts 5MBM24 are used for precise angular and linear alignment of optical elements. There are two models: one with round ( 5MBM24-1, 5MBM24-2, 5MBM24-3) and one with square ( 5MBM24-1SQ, 5MBM24-2SQ, 5MBM24-3SQ) shaped mounting opening. 5MBM24 has a resting flange to stop the optics.

    Get Price

  • Lens Tube Adapters - Newport

    These thread adapters allow a CH-1 Beamsplitter Holder to be attached to a 1.0 or 2.0 in. LT Series lens tube. C-Mount Adapters Our C-Mount Adapters are used to connect 1.0 in. LT Series lens tubes with camera lenses, beam expanders, or focal-plane array camera modules.

    Get Price

  • FUTURA PRO 19 TELEPROMPTER

    The 70/30 Optic Grade BeamSplitter mirror is the best quality mirror you can find. It is produced using one of the most sophisticated modern plating technologies available today. Being that the Beamsplitter mirror is the last optical coating between your camera-lens and subject, this should be as, if not, more important than anything else.

    Get Price

  • FUTURA 17' Teleprompter

    The FUTURA™ is a camera mount teleprompter that sits on your tripod between your camera and tripod head. The Talent will be looking directly at the lens of the camera when they are reading the text on the beamsplitter mirror. What makes the FUTURA™ so special is the newly designed chassis system (The Sled) that features a new type of camera ...

    Get Price

  • Beamsplitters: Cube or plate? - Tower Optical Corporation

    2016-12-23u2002·u2002All you need to split a beam into two beams is a single partially reflective plane surface, and something to hold it up. That surface can be the first surface of a plate, or the interior diagonal surface of a cube formed by mating two right-angle prisms. In this installment we'll examine the advantages of … Continue reading Beamsplitters: Cube or plate?

    Get Price

  • K2 DistaMax - Infinity Photo-Optical Company

    2021-4-5u2002·u2002NOTE: When the #990202 and #991130 are used without any K2 DistaMax Amplifier insystem, the objective magnification is multiplied by a factor of 1.5x. For example: 10x objective times 1.5x factor = 15x. The result is equivalent to a 15x objective used directly. Accordingly, when the CF Tube is used, the K2 DistaMax factor is 2.5x— the ideal magnification to fill the 35mm format.

    Get Price

  • PBS-2C Pellicle Beamsplitter - Newport

    Pellicle Beamsplitter. The PBS-2C Pellicle Beamsplitter is 74.9 mm in diameter with a 51.6 mm Clear Aperture in a 12.7 mm thick housing. This coated pellicle provides equal reflectance and transmission over the visible range by means of a neutral, semi-absorbing coating. The R/T curves below show average values, eliminating the often confusing ...

    Get Price

  • Optical Components: Used, Surplus, Refurbished ...

    Melles Griot : 13DMA001: Photodiode Modular Mount: 1 185.00: 124815: Melles Griot : 60-3: Post Holder: 3 8.50: 124550: New Focus : 9026: Modular Riser: 1 34.75 ...

    Get Price

  • TEMTO Technology Co., Ltd - Enable & perfect your ...

    TEMTO supply high quality custom optics & coatings. Our products include various of spherical lens, micro lens, cylindrical lens, ball lens, rod lens, window, prism, filter, beamsplitter, aspheric lens, assembly and also opto-mechanism. We are specially serving broad coatings solution.

    Get Price

  • Stock SWIR Lenses

    P/N Focal Length (mm) F-Number Field of View Working Band Focus Control Back Working Distance (mm) Mount Detector Request Quote; SO-SWIR-120-30: 12: 3: 54°(D)

    Get Price